• Log In
  • Log In
Science Leadership Academy @ Center City
Science Leadership Academy @ Center City Learn · Create · Lead
  • Students
    • Mission and Vision
  • Parents
  • Community
    • Mission and Vision
  • Calendar

Art - Freshman · Hull · d2 Band Public Feed

Create a Post

Printmaking

Posted by Saniyyah Ray in Art - Freshman · Hull · d2 Band on Saturday, June 2, 2018 at 9:30 pm

IMG-3928
IMG-3928
My element is Xenon.  It is a colorless, dense, odorless noble gas found in the Earth's atmosphere in trace amounts. Xenon is in car headlights and other lights. Google inspired me to make a laboratory light because I thought it was pretty cool and I didn't know that Xenon are in those lights. If I were to do this project again I would pick something else to draw because even though I enjoyed doing the light I don't think I challenge myself enough, I picked something pretty simple. 
Tags: Homepage
Be the first to comment.

Prints

Posted by Isabella Walls in Art - Freshman · Hull · d2 Band on Friday, June 1, 2018 at 8:31 pm

My element is bohrium number 107. Bohrium was made in a lab in small amounts. They is currently no known use for it. I made a picture of niels bohr who made the element. I drew the man and changed him to show up well in negative space. I also, used the model of the element we learned to do in bio. Next time, I would add more maybe in lab making the element. I loved printing it onto paper was fun. The process to put the paint on paper was cool.


IMG_4553
IMG_4553
IMG_4552
IMG_4552
IMG_4555
IMG_4555
Be the first to comment.

Periodic Prints: Rubidium

Posted by Nicco Carleton in Art - Freshman · Hull · d2 Band on Friday, June 1, 2018 at 7:29 pm

0601181253c
0601181253c
​Rubidium is the 37th element of the periodic table. It was found in 1861 through the flame test. Rubidium's used a getter in vacuum tubes (to remove trace gases), in fireworks to give a dark red color, in atomic clocks, and is found in photocells. I got the idea for my prints through fireworks. I thought it'd be a nice way to make a somewhat complex drawing (and I had no idea what the other things were). To make this print, I drew it on paper normally, then copied it onto a translucent copy paper. I put the copy paper onto the printing board, and traced the image really hard reverse onto it. What I got was a printing board that concaves where I drew. I covered the board in paint, put a paper on the board, and used a spoon to evenly apply pressure to the paper. I really liked the first step; coming up with ideas. I thought it was pretty creative.
Be the first to comment.

Printmaking Blog - Yasir Thomas

Posted by Yasir Thomas in Art - Freshman · Hull · d2 Band on Friday, June 1, 2018 at 6:16 pm

20180601_130659-1
20180601_130659-1

My element is titanium and the atomic number is 22. It was named titanium after a titan from greek mythology because it’s strong. Now it is mainly used to make aircraft, spacecraft, and missiles because of how strong and dense it is. I chose to do an airplane because it’s made out of titanium. At first I wanted to do a cool airplane until I realized how difficult it was to draw. So then I stuck with a regular one that only shows the front view of an airplane. To make this print I made numerous amount of sketches until I found one that was the best that I could do. Then, I traced the sketch onto tracing paper then put it on the foam. If I had to do this project over again I would chose something that would resemble how strong titanium is instead of doing a plain airplane. The part of the project that I enjoyed the most was finishing and turning in the art because I would worry about how good it was until I realized I did the best I could.


Be the first to comment.

Why is Printmaking Important? - Jimmy Kry

Posted by James Kry in Art - Freshman · Hull · d2 Band on Thursday, May 31, 2018 at 9:34 pm

Here is a Three Koi Fountain Fish that look like it took the person awhile to do

  • The main reason for it because of the different processes that are involved in creating a print through printmaking. A lot of new and talented artists have found their niche in printmaking; it is also very important to know that all the graffiti and street are actually a form of printmaking using stencils

  • Printmaking is the form and process of applying a work of art to another surface. In printmaking, more than one version of its unique techniques. There are different types of printmaking such as: intaglio, lithography, serigraphy and mono-printing

    • Intaglio:

Intaglio printing is the opposite of relief printing, in that the printing is done from ink that is below the surface of the plate. The design is cut, scratched , or etched into the printing surface or plate, which can be copper, zinc, aluminum, magnesium, plastics, or even coated paper

  • Lithography:

Lithography, planographic printing process that makes use of the immiscibility of grease and water. In the lithographic process, ink is applied to a grease-treated image on the flat printing surface; nonimage (blank) areas, which hold moisture, repel the lithographic ink

  • Serigraphy:

Screen printing is a printing technique whereby a mesh is used to transfer ink onto a substrate, except in areas made impermeable to the ink by a blocking stencil. It is also known as silk-screen, screen, serigraphy, and serigraph printing

  • Mono-printing:

Monoprinting is a form of printmaking that has lines or images that can only be made once, unlike most printmaking, there are multiple originals. Examples of standard printmaking techniques which can be used to make monoprints


Tags: Homepage
Be the first to comment.

Printmaking Element - Strontium - Jimmy Kry

Posted by James Kry in Art - Freshman · Hull · d2 Band on Thursday, May 31, 2018 at 8:23 pm

IMG_2383
IMG_2383
​My element was Strontium. The atomic number for Strontium was 38. Strontium are named after Strontian, a village in Scotland near which the mineral was discovered in 1790 by Adair Crawford and William Cruickshank; it was identified as a new element from it’s crimson-red flame test color. Strontium can increase the retention of calcium by the body, it is sometimes used to help prevent bone loss due to osteoporosis. It is known to contribute to the health of bones and teeth. It alludes to the presence of strontium in nuclear fallout. A soft, silvery metal that burns in air and reacts with water. Strontium is best known for the brilliant reds its salts give to fireworks and flares. It is also used in producing ferrite magnets and refining zinc. I researched strontium, clicked on images and saw there were images of crystals, so I used crystals as my idea for my imagery. It was hard getting all the detailed crystal lines and making sure when pressed onto the plate, that the pen won’t move everywhere. First, I had to trace my drawing on the tracing paper and trace/pressed it on the plate. I would probably do something other than a crystal because it was hard tracing it onto the plate. First, you draw your paper on a piece of paper or in a sketchbook. Second, trace the drawing from the sketch book onto the tracing paper. Third, flip your tracing paper to face the back of your drawing, then tape/paste it onto the white plate. Fourth, trace the drawing onto the plate and make sure your press down a little to see the drawing. Fifth, roll some paint onto the plate. Sixth, paste the plate onto a blank paper and then take a spoon and rub the plate. Seventh, peel the plate off of the paper. I enjoy putting paint onto my plate and pasting it onto the paper. I also enjoyed, ripping the paper because I found i satisfying.

Citations
“Strontium - Element Information, Properties and Uses | Periodic Table.” Royal Society of Chemistry - Advancing Excellence in the Chemical Sciences, www.rsc.org/periodic-table/element/38/strontium.

Be the first to comment.

Element Print

Posted by Maureen Kelly in Art - Freshman · Hull · d2 Band on Thursday, May 31, 2018 at 1:01 pm

IMG-0448
IMG-0448
My element was Iron. It has atomic number 26. Iron has been for a long time.  People say it has been around since 3000 B.C. No one knows who discovered iron. Many people say that it came down on a meteor. Iron is used to manufacture steel and civil engineering. In the human body, iron is essential for blood production. I chose to make this design because of the discovery of iron. It came down in a meteor, so I drew meteors coming to earth with iron in them. To make this print, I first had to make sketches. Then, I had to trace this design on a piece of tracing paper. When is was time to put it on foam, I flipped the tracing paper so it would be backwards on the plate. I pressed my pencil into the paper and traced my design. When I actually printed, I rolled the ink onto my plate evenly and pressed it into my paper. It took a few times to get it perfect, but I eventually got the perfect print. If I were to do this project again, I would make my design have more depth. Looking at it now, it is a little flat and adding more depth would make this more interesting. My favorite part of this project was printing. It was fun to see my final product. The big reveal after you peeled back the paper was really fun. Overall, I loved this project and would do it again. 
Be the first to comment.

Printmaking Blog Post

Posted by Lillian Bromley in Art - Freshman · Hull · d2 Band on Thursday, May 31, 2018 at 11:49 am

  • What is your element? Name and atomic number

My element is Selenium. The atomic number is 34.

  • Tell the reader about your element, history, function/use and so on.

Selenium was discovered in 1817. It is a nonmetal element that is used in supplements, dandruff products, and it is also used in glass. Some people have a selenium deficiency, for which they take a selenium pill or supplement.

  • How did you get the idea for the imagery you chose?

Selenium is named after, Selene, the greek goddess of the moon. I chose to make my image the moon, because it was connected while not being too obvious.

  • What process did you go through to make this print?

I designed my idea, and put it on tracing paper. Once it was on the tracing paper I put it on the block using pressure. I then made the prints by rolling on ink and pressing them onto paper using a wooden spoon. I carefully pulled the paper away, let it dry and matted it.

  • What would you do differently if you did this print a second time?

I would make my atomic number and symbol easier to see, as they are a little blurred

  • What part of the project did you enjoy the most? Describe the step and what you liked so much about it.

We had to think of ideas for our print and I really liked making the concept and sketching out my ideas, I really like drawing so it was fun to think of new ideas and hash them out.

IMG_2982 (1)
IMG_2982 (1)
Be the first to comment.

Element Printmaking - Ethan McLeer

Posted by Ethan McLeer in Art - Freshman · Hull · d2 Band on Friday, May 25, 2018 at 1:21 pm

IMG_0307 (1)
IMG_0307 (1)
IMG_0308 (1)
IMG_0308 (1)
IMG_0306 (1)
IMG_0306 (1)
My element is Helium. Its atomic symbol is "He" n the atomic symbol is "2". Helium is one of the most basic elements in the universe. It has 2 protons, neutrons, and electrons. Helium is lighter than air so it will float. Helium is commonly used in balloons for this property. Helium is also used in welding. The helium will protect the fresh weld for a moment so it can cool off enough for the weld to be functional. In my prints, you have a welder that is in the middle of welding. There is a lot of chaos in actual welding which is accurately depicted in the print. For the process of making the print, I started off with a sketch and then transferred that to tracing paper. I then put the tracing paper on a foam plate and traced the image onto the foam. From there, I put ink on the foam and put that on the paper. If I were to do this again, I would try to find a better tool for making lines in the foam. The lines I have now are a bit too thick. The part I enjoyed the most was the sketching. I liked being able to see what worked and what didn't. It was helpful for the result of my final prints.
Be the first to comment.

Printmaking Blog Post: Brooke Hill

Posted by Brooke Hill in Art - Freshman · Hull · d2 Band on Wednesday, May 23, 2018 at 9:05 am

IMG-6876
IMG-6876
The element that I have is platinum, and the atomic number is 78. This elements name 'platinum' is derived from the Spanish term platina, meaning "silver". Platinum was discovered in South America by Antonio de Ulloa in 1735 and N. Wood in 1741, but had been used by pre-Columbian Indians. Platinum can be used in catalytic converters, laboratory equipments, electrical contacts, dentistry equipment, and jewelry.
I got the idea of making a crown because I knew that some crowns are made out of platinum. I didn't want to make anything thing that would look boring. I wanted to make something that is simple but would still look nice.The process that I went through was kind of a struggle. It was hard to draw the crown really small and to draw the jewel in the middle. It was easy to trace onto the tracing paper. It was a small struggle to put m artwork onto the plate. I didn't carve deep enough into it, so you couldn't really see my drawing when I put the ink one. After a few more tries of carving, I was able to see my drawing. 

If I could do something differently, I would be more careful when carving into the plate. I would also try not to apply so much ink onto my plate. Sometimes if I did, you wouldn't be able to see my drawing but it was also because I didn't carve good enough. I enjoyed putting the ink onto my plate and pressing it down onto a piece of paper. It was really nice to be able to do this It was nice to see my finishing product. 
Be the first to comment.
23 posts:
  1. 1
  2. 2
  3. 3
Next →
RSS

ART9-028

Term
2017-18: 2nd Semester

Other Websites

Launch Canvas

Blog Tags

  • Homepage 2
  • Public 1

Teacher

  • Marcie Hull
Science Leadership Academy @ Center City · Location: 1482 Green St · Shipping: 550 N. Broad St Suite 202 · Philadelphia, PA 19130 · (215) 400-7830 (phone)
×

Log In