Like being in the audience

While doing some homework when I heard a couple cheers
Then it got louder and louder 
Then a choir of excited violin music came in
And the room was filled with trumpets and joyful cheers
And then I heard the first lyrics to justin beiber's never say never *shudder*
Then I looked around and realized that I did not have my tv on
Looked out my room door
Down the stairs
My dad was sitting them watching the last part of karate kid with the volume around 25
I wanted to take a deep breath and say "turn it down, i'm doing homework"
but I feel like it would somehow hurt his feelings
I just walked back into my room and
I thought about how I felt like I was in the audience
If only justin beiber hadn't popped up
Then maybe it would have been a good daydream :)

Musical Instrument Blog #1


 
My group & i decided to spell xylophone "Zillaphone", i'm telling you this because i dont want you to get confused when you see it spelled like that. =)

-How is it played? What does the person have to do to produce sound?
You hit the notes with the mallets. The Zillahphone strike the metal bars of the Zillahphone (xylophone) with a stick produces a vibration. This vibration's sound is determined by the length of the bar. The longer ones produce a much deeper sound than the shorter ones. These sounds are enhanced by the resonator tubes below the bars. Air is pushed into these tubes, creating more vibration, but at the same pitch as the bar struck. A cord runs through the center of the xylophone, lifting the bars slightly away from the frame of the instrument, letting them vibrate freely.


-How do you change a note? (you might have to watch very carefully to see this)
On an Zillahphone, there are different sized bars, the smaller the bars the higher the pitch is. The notes change depending on which bar you hit.



-How is it shaped?
Its Piano Shaped.


-What does this make you think about how you can create and change sound?
It makes me think that this would be easy to play/handle.


-What connections (if any) do you think you can draw between what you are observing and you might already know about waves?
Well i personally think that how hard you hit might effect the length of the wave, and every time you hit the bar, its another pulse.


Musical Instrument #2

​The flute produces sound by the musician blowing air into the mouthpiece. By blowing on a sharp angle and covering and uncovering holes on the flute different tunes and pitches will be produced. "The pitch can be lowered slightly by aiming the air in a downward direction into the embouchure hole, and raised slightly by aiming the airstream higher so that it crosses over the embouchure hole." I will be experimenting with different lengths of pipes to see if a shorter flute will produce a different sound than longer flute. I plan to drill holes into one side of the pipe. The holes will model holes on a real flute. I'm planing to use just pipe and drill to make the flute, if i don't make the flute of out of wood. Wood may be a tough challenge because I have no experience in cutting and sanding and it would be terrible for me or any who tries to play my "replica" of a flute and get a splinter.



No Questions :)

 

Musical Instrument Blog #1

The flute is played by blowing air from your mouth into the mouthpiece end of the flute. There are different types of blowing techniques. Most flutes are about 67 cm. There are over 6 types of flutes. The flute that I am going to model/made is "the concert flute." This flute is made of 3 parts, the headjoint, the body and the footjoint. To change the sound the the flute creates, you simply place a finger or fingers over a whole or wholes that are placed along the longer half of the flute. You can also change the sound by limiting the amount of air released from you mouth when blowing into the flute. The flute makes many different sounds, in many different pitches. When comparing the sound that the flute makes and sound waves, I imagine that the higher the wave, the higher the pitch and that if the pitch is low then the wave will be smaller.

imgres
imgres

Baby

i was going to post something about Hangover 2, but then i was completely blown away by Freda's picture below.

:(

shit like that gets me so depressed.

many of you may not know this, but i love birds.

and during this season, so many birds die from falling from their nests. and for some reason, i keep stumbling upon all of these dead little babies.

i know it's a part of life, but i hate it.

many of you know about my tragic experience of when my pet parakeet died of cancer a few years ago.

but once, about two summers ago, i tried to save a baby bird who had been thrown from his nest in a thunderstorm. i kept him for a few days in a small box and fed him as though i was his mother. i would have to feed him every 25 minutes and wake up with him in the morning when he would start to cry. i was giving him this gross mush mixture of baby food, cat food, and bread. he would actually sit in my palm and open his little mouth so i could drop the food in. he would also cuddle next to me to keep warm when i took him outside to sit in the grass.

ughh.

he died in my hands about a week later as i kissed him goodbye.

:(

apparently he had been pretty traumatized by the fall, considering his missing patches feathers that weren't growing back.

i will always have a place in my heart for my "adopted baby".

....

Let I breathe. Jedi Knight. The more space I get the better I write. Never I write. But if ever I write. I need the space to say whatever I like.

#teamheat

The NBA Finals start on Tuesday. My team as you should know by now (Miami Heat) are going up against the Dallas Mavericks. This is the rematch of the 2006 NBA Finals when the Heat came back from an 0-2 series hole to win four straight games and beat the Mavs for the title. DWade averaged 34 points. I hope I can relive that championship experience! #teamheat

Last Week

One more week of classes left. I have two benchmarks due this week, my art portfolio, I still have some things on my capstone to finish up, and make up any work that I'm missing for classes. On top of that I work some days this week. #killmenow

Blog Post #2: Xylophone

To produce sound on a xylophone, you need to hit the bars on the xylophone with mallets. That sound is produced by vibration. When the bars are hit with the mallets, they vibrate and produce sound waves that are recognized and heard. However, bars with different properties produce different sound. Shorter, thinner bars create higher pitch while longer, thicker bars create lower pitch. To raise the pitch, I can start out with one long bar, and keep shortening bars and placing the after the next. It would go from low pitch to high pitch. I will be using rosewood or the metal bars as the material for the bars because they are the easiest to access and can produce the best sound. Another way to approach it is by getting a set of wine glasses and adding water gradually from the one glass to the next. The more water, the lower the pitch; the less water the higher the pitch.

    I can play the instrument by striking the wood or glass with mallets or something along those lines.

I don't have questions really, just feedback would be great from Ms. Echols.


bontempi-12-note-wooden-xylophone_3699_500
bontempi-12-note-wooden-xylophone_3699_500
cubs-glass-xylophone-150h
cubs-glass-xylophone-150h

Musical Instrument Blog #2

Marquis Simmons

For the xylophone, the sound is produced when the plates on the xylophone are hit with the stick being used. The impact causes a vibration between the objects which results in a sound. Of course these sounds, put together melodically, makes music. i think that to change the pitch of the xylophone I would have to change the size of each plate, or pipe, which should result in a different sound.

To create my xylophone, I will use those bronze colored pipes, a piece of wood to attach them to and something to hit them with. To make sure that I have a different pitch for each pipe, I will make then different sizes. The xylophone will be easy to play by using the stick (I haven't decided what I will use), and hopefully easy to make.

Blog Post #1: Xylophone

To see a xylophone being played, click on the link:

http://www.youtube.com/watch?v=BHP5xjBP-9I

     The instrument that I plan on playing for the benchmark is the Xylophone. The xylophone originated in Asia and Africa. It consists of bars of different lengths that can be struck by plastic, wooden, or rubber to produce sound. Bars of different lengths produce different sound. The xylophone is played by striking the bars with mallets. The bars vibrate producing sound.

      The general form/shape that a xylophone is in is a rectangle or sometimes a square. To change the notes that are played on a xylophone, all you have to do is strike a different bar on the xylophone. You can change the sound by altering the density of the specific notes. This makes me think about the density of the notes and if the type of mallet matters. Also it makes me think whether hitting the bars with more force will make the sound louder. I wonder if the material of the xylophone (what its going to made of) will make a difference on the sound. The vibration of the bars when hitting them makes me think about the connection between that and the sound, and how the length matters as well.

bontempi-12-note-wooden-xylophone_3699_500
bontempi-12-note-wooden-xylophone_3699_500

Musical Instrument Blog #1

Marquis Simmons
I've always enjoyed the percussion parts of songs. So when thinking about the idea for my instrument I immediately thought about making a drum. Since we couldn't make a drum, the next  instrument I was interested in was the xylophone.

I watched a video of someone playing a big xylophone. He uses some wooden sticks with balls on the end to make the music. I'm not sure what the material of the xylophone or the balls on the sticks are. My guess about how tao change a note would be that the thicker the piece of the xylophone is, the deeper or lower the note that it makes will be. The entire xylophone is a rectangle, while each piece is also a rectangle which I guess helps make the sounds.

http://www.youtube.com/watch?v=_Ngt9CxBaMQ&feature=pyv&ad=2837289356&kw=marimba

Musical Instrument Blog #1

Marquis Simmons
I've always enjoyed the percussion parts of songs. So when thinking about the idea for my instrument I immediately thought about making a drum. Since we couldn't make a drum, the next  instrument I was interested in was the xylophone.

I watched a video of someone playing a big xylophone. He uses some wooden sticks with balls on the end to make the music. I'm not sure what the material of the xylophone or the balls on the sticks are. My guess about how tao change a note would be that the thicker the piece of the xylophone is, the deeper or lower the note that it makes will be. The entire xylophone is a rectangle, while each piece is also a rectangle which I guess helps make the sounds.

http://www.youtube.com/watch?v=_Ngt9CxBaMQ&feature=pyv&ad=2837289356&kw=marimba

Musical Instrument Blog #1

Marquis Simmons
I've always enjoyed the percussion parts of songs. So when thinking about the idea for my instrument I imediately thought about making a drum. Since we couldn't make a drum, the next  instrument I was interested in was the xylophone.

I watched a video of someone playing a big xylophone. He uses some wooden sticks with balls on the end to make the music. I'm not sure what the material of the xylophone or the balls on the sticks are. My guess about how to change a note would be that the thicker the piece of the xylophone is, the deeper or lower the note that it makes will be. The entire xylophone is a rectangle, while each piece is also a rectangle which I guess helps make the sounds.

http://www.youtube.com/watch?v=_Ngt9CxBaMQ&feature=pyv&ad=2837289356&kw=marimba