#teamheat

The NBA Finals start on Tuesday. My team as you should know by now (Miami Heat) are going up against the Dallas Mavericks. This is the rematch of the 2006 NBA Finals when the Heat came back from an 0-2 series hole to win four straight games and beat the Mavs for the title. DWade averaged 34 points. I hope I can relive that championship experience! #teamheat

Last Week

One more week of classes left. I have two benchmarks due this week, my art portfolio, I still have some things on my capstone to finish up, and make up any work that I'm missing for classes. On top of that I work some days this week. #killmenow

Blog Post #2: Xylophone

To produce sound on a xylophone, you need to hit the bars on the xylophone with mallets. That sound is produced by vibration. When the bars are hit with the mallets, they vibrate and produce sound waves that are recognized and heard. However, bars with different properties produce different sound. Shorter, thinner bars create higher pitch while longer, thicker bars create lower pitch. To raise the pitch, I can start out with one long bar, and keep shortening bars and placing the after the next. It would go from low pitch to high pitch. I will be using rosewood or the metal bars as the material for the bars because they are the easiest to access and can produce the best sound. Another way to approach it is by getting a set of wine glasses and adding water gradually from the one glass to the next. The more water, the lower the pitch; the less water the higher the pitch.

    I can play the instrument by striking the wood or glass with mallets or something along those lines.

I don't have questions really, just feedback would be great from Ms. Echols.


bontempi-12-note-wooden-xylophone_3699_500
bontempi-12-note-wooden-xylophone_3699_500
cubs-glass-xylophone-150h
cubs-glass-xylophone-150h

Musical Instrument Blog #2

Marquis Simmons

For the xylophone, the sound is produced when the plates on the xylophone are hit with the stick being used. The impact causes a vibration between the objects which results in a sound. Of course these sounds, put together melodically, makes music. i think that to change the pitch of the xylophone I would have to change the size of each plate, or pipe, which should result in a different sound.

To create my xylophone, I will use those bronze colored pipes, a piece of wood to attach them to and something to hit them with. To make sure that I have a different pitch for each pipe, I will make then different sizes. The xylophone will be easy to play by using the stick (I haven't decided what I will use), and hopefully easy to make.

Blog Post #1: Xylophone

To see a xylophone being played, click on the link:

http://www.youtube.com/watch?v=BHP5xjBP-9I

     The instrument that I plan on playing for the benchmark is the Xylophone. The xylophone originated in Asia and Africa. It consists of bars of different lengths that can be struck by plastic, wooden, or rubber to produce sound. Bars of different lengths produce different sound. The xylophone is played by striking the bars with mallets. The bars vibrate producing sound.

      The general form/shape that a xylophone is in is a rectangle or sometimes a square. To change the notes that are played on a xylophone, all you have to do is strike a different bar on the xylophone. You can change the sound by altering the density of the specific notes. This makes me think about the density of the notes and if the type of mallet matters. Also it makes me think whether hitting the bars with more force will make the sound louder. I wonder if the material of the xylophone (what its going to made of) will make a difference on the sound. The vibration of the bars when hitting them makes me think about the connection between that and the sound, and how the length matters as well.

bontempi-12-note-wooden-xylophone_3699_500
bontempi-12-note-wooden-xylophone_3699_500

Musical Instrument Blog #1

Marquis Simmons
I've always enjoyed the percussion parts of songs. So when thinking about the idea for my instrument I immediately thought about making a drum. Since we couldn't make a drum, the next  instrument I was interested in was the xylophone.

I watched a video of someone playing a big xylophone. He uses some wooden sticks with balls on the end to make the music. I'm not sure what the material of the xylophone or the balls on the sticks are. My guess about how tao change a note would be that the thicker the piece of the xylophone is, the deeper or lower the note that it makes will be. The entire xylophone is a rectangle, while each piece is also a rectangle which I guess helps make the sounds.

http://www.youtube.com/watch?v=_Ngt9CxBaMQ&feature=pyv&ad=2837289356&kw=marimba

Musical Instrument Blog #1

Marquis Simmons
I've always enjoyed the percussion parts of songs. So when thinking about the idea for my instrument I immediately thought about making a drum. Since we couldn't make a drum, the next  instrument I was interested in was the xylophone.

I watched a video of someone playing a big xylophone. He uses some wooden sticks with balls on the end to make the music. I'm not sure what the material of the xylophone or the balls on the sticks are. My guess about how tao change a note would be that the thicker the piece of the xylophone is, the deeper or lower the note that it makes will be. The entire xylophone is a rectangle, while each piece is also a rectangle which I guess helps make the sounds.

http://www.youtube.com/watch?v=_Ngt9CxBaMQ&feature=pyv&ad=2837289356&kw=marimba

Musical Instrument Blog #1

Marquis Simmons
I've always enjoyed the percussion parts of songs. So when thinking about the idea for my instrument I imediately thought about making a drum. Since we couldn't make a drum, the next  instrument I was interested in was the xylophone.

I watched a video of someone playing a big xylophone. He uses some wooden sticks with balls on the end to make the music. I'm not sure what the material of the xylophone or the balls on the sticks are. My guess about how to change a note would be that the thicker the piece of the xylophone is, the deeper or lower the note that it makes will be. The entire xylophone is a rectangle, while each piece is also a rectangle which I guess helps make the sounds.

http://www.youtube.com/watch?v=_Ngt9CxBaMQ&feature=pyv&ad=2837289356&kw=marimba

Ooppss......

I had a long shift at work today: 9:30-5.  It must have been near the end; I was getting tired.  I had taken the customer's change, $2:75, from the register.  I guess my coworker was in front of the register, so I had to hand the change over the bar. Being the clumsy, short person I am, I was unable to reach her hand and had to get on my tiptoes.  In the midst of all this confusion, I dropped two quarters. In the strawberry sauce. I'm just glad my boss wasn't there to see it. 

Blog post 2 - xylophone

The xylophone makes sound, as similar to other percussion family instrument, by vibrating. To be more specific, when the mallet hits the bars, it makes the bars vibrate. From that vibration, it creates waves in the surrounding air, and finally, these waves are recognized as sound by humans' brain! It is so interesting to discover how these bars' properties are accountable for the pitch that they make. First, shorter, denser, and thinner bar makes higher pitch(I used to understand this as the other way around). In order to adjust the pitch, the bars need to be adjusted, according to its properties. To higher the pitch, I can make the ends thinner, or carve out a semi oval [or rectangle] section in the middle of the bars between the nodes, or shorter the bars. However, the density of the bars cannot be changed, since that's a permanent property of the material. I only have properties for pitches of rosewood, so I'll be using rosewood as the material for my xylophone. I will be constructing my xylophone by using wooden bars (lengths are according to the property table that I downloaded :D), and hammer them into a triangle wooden box. 


Questions: How does the box underneath the bars amplified its volume? And why does longer bar has lower pitch? Please answer this (or show me how to find out the answer) asap, Ms. Écholsawnsome:)




wooden-toy---12-tone-xylophone-hq-009-131
wooden-toy---12-tone-xylophone-hq-009-131

I Feel...

Like my previous post wasn't a story so here is another one...

Ms. Hull: "Marchella, I saw your senior picture the other day and it was so pretty!" 
Me "Ummmm...Thank you Ms. Hull!"

Random complements when stressed make you feel pretty awesome. 

Saturday

Today I played wiffle ball with my sister, brother, father, step-mom and my sister's friend, Sam. They put me, Sam and Giana on a team. And my father, brother who is on a baseball team and my step-mom on a team together. We lost 5-4 in the last inning. Damn.

English Portfolio- Reflection

As 9th grader who's on her way to being a 10th grader, I feel that my work in the beginning represented someone who was transitioning from the 8th grade. However, as the year progressed and I was guided on how to become a better writer, my work became stronger. And rather than receiving a 70 as a grade, I received 90's. When people read my work, I want them to think of the actual subject and not who's behind it. Why? because I want people to actually think about what ever it is that I wrote and not form an opinion about me personally, until the end.

Ninth grade English was definitely not what I suspected. I thought it was going to be a breeze because I have always been an A student when it came to reading and writing. Boy was I wrong, I was challenged form the very first day we came into Ms. Dunn's Class. Regardless of how challenging it got, Ms. Dunn was always there for us-And ms. Findlay too-. I am grateful to have been given the chance to be taught how to become a better writer. My writing now compared to my writing in September is completely different. But different in a good way. My weakness as a writer I would have to say is the fact that my vocabulary isn't broad enough. I work on that everyday by just sitting down and picking up the dictionary every once in a while. One of my strengths would probably be comprehension. I understand text immediately and already have a response to whatever it is I read.

For this project I may have encountered an Issue as far as uploading and putting things onto the blog. But this was mostly because of technical difficulties. Anyways, when I went back through my work, I was proud of the few errors I had, but disappointed in the errors that were made. There were some things where I felt like it shouldn't have been a mistake that I made. I simply had to retouch most of my work however. It felt great to go back through my old work and look at what I have become over the past few months.

bliss

It's really good having my mom here, finally. It feels like she has been gone for a year or so, but the time apart really did help me realize how much she does to keep the house mantained and everyone fed. It's a jungle out here (my house) filled with blood craving savages (my hungry brothers) who will stop at nothing until they are fed.... (by me). But now that I'm not in charge anymore, it's nice to have my "independence" back. Well I have loads of work to do. I plan on getting it done; I just got an awesome second job, and I'm sorta happy.

:)

Blog Post #2

1.  When I tap the glass, it vibrates.  The vibrations create sound waves that travel outwards and reach the ears of people nearby.  When the glass moves, it causes the air molecules around it to bump into each other and get compressed.  This results in a chain reaction in which air molecules travel away from the glass, becoming compressed.  Since the glass is circular and there is nothing to block the movement of the sound waves, the sound can reach anyone within a certain radius.

2.  I will change the pitch by changing the amount of water inside the glass.  The more water there is in the glass, the lower the pitch will be.  This is because when there is water inside the glass, some of the energy that would be pushing air molecules is moving water molecules instead.  The more water there is in the glass, the more energy is diverted to moving the water instead of the air.  This creates a lower pitch.

3.  I will be using a set of cheap wine glasses glued to a simple surface like a piece of wood, to keep all the glasses together and safe.  I will pour different amounts of water into each glass to achieve different notes.  I will play the instrument by tapping different glasses to produce different sounds.

4.  How can I precisely measure the amount of water to put in each glass so that I can achieve specific notes?  Should I be careful to tap each glass in the same specific place?

Musical Instrument Blog Post #1


You hold the handheld instrument in one or both hands and you blow on the top of each tube to make a specific sound(various pitches). In order to produce sound the pipes has two holes in them and the hole that you must blow in will be at the top and the bottom hole should be covered up by something so that the sound does not just travel straight through the pipe. To change a note, the user must blow on one of the pipes. Each pipe should create a certain pitch based on its size. The instrument is a row of pvc pipes from lowest to highest or vice versa. The instrument can also be made small enough to fit in your hand and also big enough to be played while sitting on a table. It is shaped basically like a set of stairs because of the row of pvc pipe sizes. The working of the instrument makes me think that the various sizes of the pipes are essential factors when it comes to producing the different pitches of sound. In all I believe that the wave of sound is specifically produced in an individual pipe to produce a certain pitch each time. None of the waves are the same because of the different types of sound produced. 




7633902-lg
7633902-lg